If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle responsible – your headlights, also called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Mercedes Vito? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Vito.

adjust-headlights-mercedes-vito

Why adjust the headlights of your Mercedes Vito?

So let’s start our content with the benefit of adjusting the headlights of your Mercedes Vito. For most people, our headlights are adjusted good enough, and they appear to light up enough at night. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Mercedes Vito are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Mercedes Vito for safety

First of all, the headlight adjustment of a Mercedes Vito must be done for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Mercedes Vito . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Mercedes Vito for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Mercedes Vito?

We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Mercedes Vito? This setting may seem a bit difficult, but by following the guidance you should be able to perform it without too much concern.

Preparations to adjust the headlights of a Mercedes Vito

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Mercedes Vito

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical control of the headlights of your Mercedes Vito (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Mercedes Vito is logical, do not hesitate to check it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Mercedes Vito, please go through our content on this subject matter.

If you want more tutorials on the Mercedes Vito, go to our Mercedes Vito category.