Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car at fault – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Mercedes Sprinter 2? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Sprinter 2.

adjust-headlights-mercedes-sprinter-2

Why adjust the headlights of your Mercedes Sprinter 2?

So let’s begin our article with the benefit of adjusting the headlights of your Mercedes Sprinter 2. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Regrettably this is not constantly the case and checking this setting, either because the headlights on your Mercedes Sprinter 2 are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Mercedes Sprinter 2 for safety

First of all, the headlight adjustment of a Mercedes Sprinter 2 must be finished for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mercedes Sprinter 2 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Mercedes Sprinter 2 for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Mercedes Sprinter 2?

We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Mercedes Sprinter 2? This adjustment might seem a bit difficult, but by following the guidance you should be able to perform it without too much trouble.

Preparations to adjust the headlights of a Mercedes Sprinter 2

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Mercedes Sprinter 2

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical control of the headlights of your Mercedes Sprinter 2 (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Mercedes Sprinter 2 is logical, do not hesitate to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Mercedes Sprinter 2, please go through our article on this subject matter.

If you need more tutorials on the Mercedes Sprinter 2, go to our Mercedes Sprinter 2 category.