If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Mercedes Classe Glc? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Classe Glc.
Why adjust the headlights of your Mercedes Classe Glc?
So let’s start our article with the interest of adjusting the headlights of your Mercedes Classe Glc. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough during the night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Mercedes Classe Glc are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Mercedes Classe Glc for safety
To begin with, the headlight adjustment of a Mercedes Classe Glc must be carried out for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mercedes Classe Glc . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mercedes Classe Glc for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Classe Glc?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Mercedes Classe Glc? This adjustment may seem a bit complex, but by simply following the guidance you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Mercedes Classe Glc
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Classe Glc
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Mercedes Classe Glc (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Mercedes Classe Glc is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mercedes Classe Glc, please go through our article on this subject.
In the event that you have any further questions about the Mercedes Classe Glc, do not hesitate to consult our Mercedes Classe Glc category.
