If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, as well known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Mercedes Actros? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mercedes Actros.
Why adjust the headlights of your Mercedes Actros?
So let’s start our content with the interest of adjusting the headlights of your Mercedes Actros. For most people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Mercedes Actros are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Mercedes Actros for safety
To begin with, the headlight adjustment of a Mercedes Actros must be achieved for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mercedes Actros . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mercedes Actros for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mercedes Actros?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Mercedes Actros? This adjustment may appear a bit complicated, but by following the guidance you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Mercedes Actros
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mercedes Actros
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Mercedes Actros (they are in general designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mercedes Actros is coherent, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mercedes Actros, please go through our content on this subject.
If you need more tutorials on the Mercedes Actros, go to our Mercedes Actros category.
