If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Mazda Mx5? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda Mx5.
Why adjust the headlights of your Mazda Mx5?
So let’s start our content page with the interest of adjusting the headlights of your Mazda Mx5. For many people, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Unfortunately this is not constantly the case and checking this setting, either because the headlights on your Mazda Mx5 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Mazda Mx5 for safety
To begin with, the headlight adjustment of a Mazda Mx5 must be made for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Mazda Mx5 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mazda Mx5 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda Mx5?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Mazda Mx5? This setting may seem a bit complex, but by simply following the instructions you should be able to perform it without too much issue.
Preparations to adjust the headlights of a Mazda Mx5
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda Mx5
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Mazda Mx5 (they are in most cases designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mazda Mx5 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Mazda Mx5, please browse our content page on this subject matter.
If you want more tutorials on the Mazda Mx5, go to our Mazda Mx5 category.
