If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car at fault – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Mazda MX 5 Miata? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda MX 5 Miata.
Why adjust the headlights of your Mazda MX 5 Miata?
So let’s start our content with the interest of adjusting the headlights of your Mazda MX 5 Miata. For many people, our headlights are adjusted good enough, and they seem to light up enough through the night. However this is not always the circumstance and checking this setting, either because the headlights on your Mazda MX 5 Miata are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Mazda MX 5 Miata for safety
First of all, the headlight adjustment of a Mazda MX 5 Miata must be conducted for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mazda MX 5 Miata . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mazda MX 5 Miata for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda MX 5 Miata?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Mazda MX 5 Miata? This adjustment might seem a bit complicated, but by following the guidelines you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Mazda MX 5 Miata
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda MX 5 Miata
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Mazda MX 5 Miata (they are generally designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mazda MX 5 Miata is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Mazda MX 5 Miata, please read our content on this subject matter.
To get more tips on the Mazda MX 5 Miata, take a look at the Mazda MX 5 Miata category.
