If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Mazda CX 9? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda CX 9.
Why adjust the headlights of your Mazda CX 9?
So let’s begin our content with the interest of adjusting the headlights of your Mazda CX 9. For most of us, our headlights are adjusted good enough, and they appear to light up enough through the night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Mazda CX 9 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Mazda CX 9 for safety
First of all, the headlight adjustment of a Mazda CX 9 must be made for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Mazda CX 9 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mazda CX 9 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda CX 9?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Mazda CX 9? This adjustment may seem a bit difficult, but by following the recommendations you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Mazda CX 9
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda CX 9
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Mazda CX 9 (they are usually designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mazda CX 9 is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mazda CX 9, please browse our content on this subject.
If you need more guides on the Mazda CX 9, go to our Mazda CX 9 category.
