Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to blame – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Mazda CX 5? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda CX 5.
Why adjust the headlights of your Mazda CX 5?
So let’s begin our content page with the interest of adjusting the headlights of your Mazda CX 5. For most people, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not always the case and examining this setting, either because the headlights on your Mazda CX 5 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Mazda CX 5 for safety
To begin with, the headlight adjustment of a Mazda CX 5 must be carried out for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Mazda CX 5 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mazda CX 5 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda CX 5?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Mazda CX 5? This setting might seem a bit complex, but by simply following the guidelines you should be able to complete it without too much issue.
Preparations to adjust the headlights of a Mazda CX 5
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda CX 5
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Mazda CX 5 (they are usually designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Mazda CX 5 is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mazda CX 5, please read our content page on this subject matter.
If you wish more tutorials on the Mazda CX 5, go to our Mazda CX 5 category.
