If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle at fault – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Mazda CX 30? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda CX 30.

adjust-headlights-mazada-cx-30

Why adjust the headlights of your Mazda CX 30?

So let’s begin our article with the benefit of adjusting the headlights of your Mazda CX 30. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at night. However this is not constantly the case and checking this setting, either because the headlights on your Mazda CX 30 are not bright enough, or because you have the impression that they are too weak is a good idea .

Adjusting the high beams of your Mazda CX 30 for safety

To begin with, the headlight adjustment of a Mazda CX 30 must be achieved for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mazda CX 30 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Mazda CX 30 for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Mazda CX 30?

We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Mazda CX 30? This adjustment may appear a bit complex, but by following the instructions you should have the ability to do it without too much trouble.

Preparations to adjust the headlights of a Mazda CX 30

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Mazda CX 30

Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Mazda CX 30 (they are in most cases marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Mazda CX 30 is logical, do not hesitate to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Mazda CX 30, please go through our article on this subject.

If you need more guides on the Mazda CX 30, go to our Mazda CX 30 category.