If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car to take responsibility – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Mazda 2? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mazda 2.
Why adjust the headlights of your Mazda 2?
So let’s begin our content page with the benefit of adjusting the headlights of your Mazda 2. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not constantly the case and looking at this setting, either because the headlights on your Mazda 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Mazda 2 for safety
First of all, the headlight adjustment of a Mazda 2 must be made for a very easy safety explanation. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Mazda 2 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mazda 2 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mazda 2?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Mazda 2? This setting may appear a bit complicated, but by simply following the recommendations you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Mazda 2
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mazda 2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Mazda 2 (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mazda 2 is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mazda 2, please go through our content page on this subject matter.
If you have any additional questions about the Mazda 2, do not hesitate to consult our Mazda 2 category.
