Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to take responsibility – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Lincoln Continental? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Lincoln Continental.
Why adjust the headlights of your Lincoln Continental?
So let’s begin our content page with the benefit of adjusting the headlights of your Lincoln Continental. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough during the night. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Lincoln Continental are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Lincoln Continental for safety
First of all, the headlight adjustment of a Lincoln Continental must be carried out for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Lincoln Continental . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Lincoln Continental for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lincoln Continental?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Lincoln Continental? This setting may seem a bit complicated, but by simply following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Lincoln Continental
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Lincoln Continental
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Lincoln Continental (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Lincoln Continental is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Lincoln Continental, please browse our content page on this subject.
If you wish more guides on the Lincoln Continental, go to our Lincoln Continental category.
