If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle to blame – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Lexus NX? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Lexus NX.
Why adjust the headlights of your Lexus NX?
So let’s start our article with the benefit of adjusting the headlights of your Lexus NX. For most of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Lexus NX are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Lexus NX for safety
First of all, the headlight adjustment of a Lexus NX must be achieved for a basic security reason. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Lexus NX . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Lexus NX for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lexus NX?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Lexus NX? This adjustment might seem a bit difficult, but by following the recommendations you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Lexus NX
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Lexus NX
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Lexus NX (they are in most cases marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Lexus NX is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Lexus NX, please browse our article on this subject.
To get more tips on the Lexus NX, take a look at the Lexus NX category.
