If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Lexus GX? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Lexus GX.

adjust-headlights-lexus-gx

Why adjust the headlights of your Lexus GX?

So let’s begin our content with the interest of adjusting the headlights of your Lexus GX. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough through the night. However this is not always the circumstance and examining this setting, either because the headlights on your Lexus GX are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Lexus GX for safety

To begin with, the headlight adjustment of a Lexus GX must be conducted for a basic security motive. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Lexus GX . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Lexus GX for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Lexus GX?

We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Lexus GX? This adjustment may appear a bit complex, but by simply following the instructions you should have the ability to complete it without too much problem.

Preparations to adjust the headlights of a Lexus GX

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his Lexus GX

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Lexus GX (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Lexus GX is logical, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Lexus GX, please go through our content on this subject matter.

In the event that you have any additional questions about the Lexus GX, do not hesitate to consult our Lexus GX category.