If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Lexus CT? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Lexus CT.
Why adjust the headlights of your Lexus CT?
So let’s begin our content with the interest of adjusting the headlights of your Lexus CT. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Sadly this is not constantly the case and checking this setting, either because the headlights on your Lexus CT are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Lexus CT for safety
First of all, the headlight adjustment of a Lexus CT must be done for a basic security reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Lexus CT . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Lexus CT for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Lexus CT?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Lexus CT? This adjustment may appear a bit complicated, but by following the recommendations you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Lexus CT
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Lexus CT
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Lexus CT (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Lexus CT is coherent, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Lexus CT, please go through our content on this subject matter.
To find more tips on the Lexus CT, take a look at the Lexus CT category.
