If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, as well called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Land Rover Range Rover? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Range Rover.
Why adjust the headlights of your Land Rover Range Rover?
So let’s start our content with the benefit of adjusting the headlights of your Land Rover Range Rover. For many of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Land Rover Range Rover are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Land Rover Range Rover for safety
To begin with, the headlight adjustment of a Land Rover Range Rover must be carried out for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Land Rover Range Rover . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Land Rover Range Rover for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover Range Rover?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Land Rover Range Rover? This setting may appear a bit difficult, but by following the guidance you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Land Rover Range Rover
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover Range Rover
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Land Rover Range Rover (they are generally designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Land Rover Range Rover is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Land Rover Range Rover, please read our content on this subject.
If you need more tutorials on the Land Rover Range Rover, go to our Land Rover Range Rover category.
