Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, as well identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Land Rover Range Rover Evoque? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Range Rover Evoque.
Why adjust the headlights of your Land Rover Range Rover Evoque?
So let’s start our content page with the interest of adjusting the headlights of your Land Rover Range Rover Evoque. For many people, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Land Rover Range Rover Evoque are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Land Rover Range Rover Evoque for safety
To begin with, the headlight adjustment of a Land Rover Range Rover Evoque must be made for a simple security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Land Rover Range Rover Evoque . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Land Rover Range Rover Evoque for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover Range Rover Evoque?
We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Land Rover Range Rover Evoque? This setting might seem a bit complicated, but by following the instructions you should have the ability to perform it without too much problem.
Preparations to adjust the headlights of a Land Rover Range Rover Evoque
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover Range Rover Evoque
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Land Rover Range Rover Evoque (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Land Rover Range Rover Evoque is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Land Rover Range Rover Evoque, please go through our content page on this subject.
Whenever you have any further questions about the Land Rover Range Rover Evoque, do not hesitate to consult our Land Rover Range Rover Evoque category.
