Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Land Rover LR4? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover LR4.
Why adjust the headlights of your Land Rover LR4?
So let’s begin our content with the interest of adjusting the headlights of your Land Rover LR4. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough through the night. However this is not constantly the case and examining this setting, either because the headlights on your Land Rover LR4 are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Land Rover LR4 for safety
To begin with, the headlight adjustment of a Land Rover LR4 must be done for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Land Rover LR4 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Land Rover LR4 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover LR4?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Land Rover LR4? This adjustment might seem a bit complicated, but by simply following the recommendations you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Land Rover LR4
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover LR4
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Land Rover LR4 (they are generally designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Land Rover LR4 is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Land Rover LR4, please read our content on this subject matter.
To get more tips on the Land Rover LR4, take a look at the Land Rover LR4 category.
