Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to blame – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Land Rover Discovery? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Land Rover Discovery.
Why adjust the headlights of your Land Rover Discovery?
So let’s begin our article with the interest of adjusting the headlights of your Land Rover Discovery. For many people, our headlights are adjusted good enough, and they seem to light up enough at night. However this is not constantly the circumstance and checking this setting, either because the headlights on your Land Rover Discovery are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Land Rover Discovery for safety
First of all, the headlight adjustment of a Land Rover Discovery must be done for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Land Rover Discovery . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Land Rover Discovery for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Land Rover Discovery?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Land Rover Discovery? This adjustment might seem a bit complex, but by simply following the guidelines you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Land Rover Discovery
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Land Rover Discovery
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Land Rover Discovery (they are in general marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Land Rover Discovery is coherent, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Land Rover Discovery, please browse our article on this subject matter.
To discover more tips on the Land Rover Discovery, take a look at the Land Rover Discovery category.
