Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car to take responsibility – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Kia Xceed? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Kia Xceed.

adjust-headlights-kia-xceed

Why adjust the headlights of your Kia Xceed?

So let’s start our article with the benefit of adjusting the headlights of your Kia Xceed. For many people, our headlights are adjusted good enough, and they appear to light up enough at night. However this is not always the case and looking at this setting, either because the headlights on your Kia Xceed are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Kia Xceed for safety

First of all, the headlight adjustment of a Kia Xceed must be done for a basic security reason. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Kia Xceed . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Kia Xceed for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Kia Xceed?

We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Kia Xceed? This adjustment may seem a bit difficult, but by following the recommendations you should have the ability to complete it without too much concern.

Preparations to adjust the headlights of a Kia Xceed

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Kia Xceed

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Kia Xceed (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Kia Xceed is logical, do not hesitate to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Kia Xceed, please browse our article on this subject.

To discover more tips on the Kia Xceed, take a look at the Kia Xceed category.