If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, as well identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Kia Sedona? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Kia Sedona.
Why adjust the headlights of your Kia Sedona?
So let’s begin our content page with the interest of adjusting the headlights of your Kia Sedona. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not always the case and checking this setting, either because the headlights on your Kia Sedona are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Kia Sedona for safety
First of all, the headlight adjustment of a Kia Sedona must be conducted for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Kia Sedona . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Kia Sedona for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Kia Sedona?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Kia Sedona? This setting may seem a bit complicated, but by following the guidance you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Kia Sedona
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Kia Sedona
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Kia Sedona (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Kia Sedona is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Kia Sedona, please browse our content page on this subject matter.
In the event that you have any further questions about the Kia Sedona, do not hesitate to consult our Kia Sedona category.
