Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car to take responsibility – your headlights, also identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Kia Picanto 3? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Kia Picanto 3.
Why adjust the headlights of your Kia Picanto 3?
So let’s begin our content with the interest of adjusting the headlights of your Kia Picanto 3. For most people, our headlights are adjusted good enough, and they appear to light up enough at night. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Kia Picanto 3 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Kia Picanto 3 for safety
First of all, the headlight adjustment of a Kia Picanto 3 must be carried out for a very easy safety reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Kia Picanto 3 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Kia Picanto 3 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Kia Picanto 3?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Kia Picanto 3? This setting might seem a bit complicated, but by simply following the guidance you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Kia Picanto 3
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Kia Picanto 3
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Kia Picanto 3 (they are usually designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Kia Picanto 3 is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Kia Picanto 3, please browse our content on this subject matter.
To find more tips on the Kia Picanto 3, take a look at the Kia Picanto 3 category.
