If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, also identified as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Jeep Renegade? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Jeep Renegade.
Why adjust the headlights of your Jeep Renegade?
So let’s start our content page with the benefit of adjusting the headlights of your Jeep Renegade. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not constantly the circumstance and looking at this setting, either because the headlights on your Jeep Renegade are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Jeep Renegade for safety
To begin with, the headlight adjustment of a Jeep Renegade must be conducted for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Jeep Renegade . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Jeep Renegade for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jeep Renegade?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Jeep Renegade? This adjustment may seem a bit difficult, but by simply following the guidelines you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Jeep Renegade
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Jeep Renegade
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Jeep Renegade (they are in general designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Jeep Renegade is logical, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Jeep Renegade, please go through our content page on this subject.
To discover more tips on the Jeep Renegade, take a look at the Jeep Renegade category.
