If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Jeep Patriot? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Jeep Patriot.
Why adjust the headlights of your Jeep Patriot?
So let’s start our content page with the benefit of adjusting the headlights of your Jeep Patriot. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough during the night. However this is not constantly the circumstance and examining this setting, either because the headlights on your Jeep Patriot are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Jeep Patriot for safety
First of all, the headlight adjustment of a Jeep Patriot must be conducted for a simple security reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Jeep Patriot . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Jeep Patriot for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jeep Patriot?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Jeep Patriot? This adjustment may appear a bit complicated, but by simply following the instructions you should have the ability to perform it without too much problem.
Preparations to adjust the headlights of a Jeep Patriot
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Jeep Patriot
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Jeep Patriot (they are in most cases designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Jeep Patriot is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Jeep Patriot, please read our content page on this subject.
To discover more tips on the Jeep Patriot, take a look at the Jeep Patriot category.
