If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car responsible – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Jeep Liberty? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Jeep Liberty.
Why adjust the headlights of your Jeep Liberty?
So let’s start our article with the interest of adjusting the headlights of your Jeep Liberty. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough through the night. Regrettably this is not always the case and examining this setting, either because the headlights on your Jeep Liberty are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Jeep Liberty for safety
First of all, the headlight adjustment of a Jeep Liberty must be achieved for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Jeep Liberty . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Jeep Liberty for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Jeep Liberty?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Jeep Liberty? This adjustment may appear a bit complex, but by following the guidelines you should be able to do it without too much problem.
Preparations to adjust the headlights of a Jeep Liberty
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Jeep Liberty
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical control of the headlights of your Jeep Liberty (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Jeep Liberty is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Jeep Liberty, please browse our article on this subject.
In the event that you have any additional questions about the Jeep Liberty, do not hesitate to consult our Jeep Liberty category.
