If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Jaguar XF? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Jaguar XF.

adjust-headlights-jaguar-xf

Why adjust the headlights of your Jaguar XF?

So let’s begin our content page with the benefit of adjusting the headlights of your Jaguar XF. For the majority of us, our headlights are adjusted well enough, and they appear to light up enough at night. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Jaguar XF are not bright enough, or because you have the impression that they are too weak is a wise decision .

Adjusting the high beams of your Jaguar XF for safety

First of all, the headlight adjustment of a Jaguar XF must be done for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Jaguar XF . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Jaguar XF for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Jaguar XF?

We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Jaguar XF? This adjustment may appear a bit complex, but by simply following the recommendations you should be able to do it without too much issue.

Preparations to adjust the headlights of a Jaguar XF

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Jaguar XF

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Jaguar XF (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Jaguar XF is logical, do not hesitate to check it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Jaguar XF, please read our content page on this subject matter.

Whenever you have any additional questions about the Jaguar XF, do not hesitate to consult our Jaguar XF category.