If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your iveco daily? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your iveco daily.
Why adjust the headlights of your iveco daily?
So let’s begin our content with the benefit of adjusting the headlights of your iveco daily. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. However this is not constantly the circumstance and examining this setting, either because the headlights on your iveco daily are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your iveco daily for safety
To begin with, the headlight adjustment of a iveco daily must be finished for a basic security reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your iveco daily . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a iveco daily for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a iveco daily?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his iveco daily? This adjustment might seem a bit difficult, but by following the guidelines you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a iveco daily
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his iveco daily
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your iveco daily (they are in general marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your iveco daily is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your iveco daily, please go through our content on this subject matter.
To find more tips on the iveco daily, take a look at the iveco daily category.
