Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car at fault – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Infiniti QX80? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Infiniti QX80.
Why adjust the headlights of your Infiniti QX80?
So let’s start our content page with the interest of adjusting the headlights of your Infiniti QX80. For most people, our headlights are adjusted well enough, and they appear to light up enough during the night. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Infiniti QX80 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Infiniti QX80 for safety
To begin with, the headlight adjustment of a Infiniti QX80 must be made for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Infiniti QX80 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Infiniti QX80 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Infiniti QX80?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Infiniti QX80? This setting may appear a bit complicated, but by simply following the instructions you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Infiniti QX80
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Infiniti QX80
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Infiniti QX80 (they are in general marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Infiniti QX80 is logical, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Infiniti QX80, please browse our content page on this subject matter.
In the event that you have any further questions about the Infiniti QX80, do not hesitate to consult our Infiniti QX80 category.
