If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Infiniti QX70? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Infiniti QX70.

adjust-headlights-infiniti-qx70

Why adjust the headlights of your Infiniti QX70?

So let’s start our article with the benefit of adjusting the headlights of your Infiniti QX70. For many of us, our headlights are adjusted good enough, and they seem to light up enough during the night. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Infiniti QX70 are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Infiniti QX70 for safety

To begin with, the headlight adjustment of a Infiniti QX70 must be made for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Infiniti QX70 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Infiniti QX70 for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Infiniti QX70?

We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Infiniti QX70? This setting may appear a bit complex, but by following the instructions you should be able to accomplish it without too much issue.

Preparations to adjust the headlights of a Infiniti QX70

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his Infiniti QX70

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, find the screws for horizontal and vertical control of the headlights of your Infiniti QX70 (they are in most cases designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Infiniti QX70 is coherent, do not think twice to check it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Infiniti QX70, please read our article on this subject matter.

To discover more tips on the Infiniti QX70, take a look at the Infiniti QX70 category.