Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Infiniti QX30? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Infiniti QX30.
Why adjust the headlights of your Infiniti QX30?
So let’s start our content with the benefit of adjusting the headlights of your Infiniti QX30. For most people, our headlights are adjusted well enough, and they seem to light up enough at night. However this is not constantly the case and checking this setting, either because the headlights on your Infiniti QX30 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Infiniti QX30 for safety
To begin with, the headlight adjustment of a Infiniti QX30 must be conducted for a basic security motive. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Infiniti QX30 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Infiniti QX30 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Infiniti QX30?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Infiniti QX30? This adjustment may seem a bit complex, but by simply following the guidance you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Infiniti QX30
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Infiniti QX30
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Infiniti QX30 (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Infiniti QX30 is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Infiniti QX30, please go through our content on this subject.
If you need more guides on the Infiniti QX30, go to our Infiniti QX30 category.
