Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car guilty – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Hyundai Veloster? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Veloster.
Why adjust the headlights of your Hyundai Veloster?
So let’s start our content page with the benefit of adjusting the headlights of your Hyundai Veloster. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough at night. Sadly this is not always the case and looking at this setting, either because the headlights on your Hyundai Veloster are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Hyundai Veloster for safety
To begin with, the headlight adjustment of a Hyundai Veloster must be achieved for a simple safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Hyundai Veloster . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Hyundai Veloster for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Veloster?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Hyundai Veloster? This setting might seem a bit complicated, but by following the instructions you should be able to do it without too much issue.
Preparations to adjust the headlights of a Hyundai Veloster
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Veloster
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Hyundai Veloster (they are usually designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Hyundai Veloster is logical, do not hesitate to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Hyundai Veloster, please browse our content page on this subject.
To discover more tips on the Hyundai Veloster, take a look at the Hyundai Veloster category.
