If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your hyundai i20? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your hyundai i20.

adjust-headlights-hyundai-i20

Why adjust the headlights of your hyundai i20?

So let’s begin our content with the benefit of adjusting the headlights of your hyundai i20. For most of us, our headlights are adjusted good enough, and they seem to light up enough at night. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your hyundai i20 are not bright enough, or because you have the sensation that they are too weak is a good idea .

Adjusting the high beams of your hyundai i20 for safety

First of all, the headlight adjustment of a hyundai i20 must be carried out for a simple safety reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your hyundai i20 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a hyundai i20 for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a hyundai i20?

We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his hyundai i20? This adjustment may appear a bit complicated, but by following the guidelines you should have the ability to complete it without too much trouble.

Preparations to adjust the headlights of a hyundai i20

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his hyundai i20

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your hyundai i20 (they are in most cases marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your hyundai i20 is coherent, do not think twice to check it after you have driven it, often it may move.

.
If you want to adjust the fog lights on your hyundai i20, please browse our content on this subject matter.

If you wish more guides on the hyundai i20, go to our hyundai i20 category.