If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle responsible – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your hyundai i10? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your hyundai i10.

adjust-headlights-hyundai-i10

Why adjust the headlights of your hyundai i10?

So let’s start our content with the benefit of adjusting the headlights of your hyundai i10. For most people, our headlights are adjusted sufficiently, and they seem to light up enough during the night. Unfortunately this is not always the case and examining this setting, either because the headlights on your hyundai i10 are not bright enough, or because you have the sensation that they are too weak is a good idea .

Adjusting the high beams of your hyundai i10 for safety

First of all, the headlight adjustment of a hyundai i10 must be achieved for a very easy security reason. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your hyundai i10 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a hyundai i10 for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a hyundai i10?

We will now move on to the part that interests you the most in this article, how to adjust the headlights of his hyundai i10? This adjustment may seem a bit complicated, but by simply following the guidelines you should be able to complete it without too much problem.

Preparations to adjust the headlights of a hyundai i10

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.

The headlight adjustment of his hyundai i10

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, identify the screws for horizontal and vertical modification of the headlights of your hyundai i10 (they are generally designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your hyundai i10 is logical, do not hesitate to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your hyundai i10, please browse our content on this subject matter.

To discover more tips on the hyundai i10, take a look at the hyundai i10 category.