If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car to blame – your headlights, as well identified as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your hyundai getz? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your hyundai getz.
Why adjust the headlights of your hyundai getz?
So let’s start our content page with the interest of adjusting the headlights of your hyundai getz. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. However this is not always the circumstance and examining this setting, either because the headlights on your hyundai getz are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your hyundai getz for safety
To begin with, the headlight adjustment of a hyundai getz must be finished for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your hyundai getz . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a hyundai getz for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a hyundai getz?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his hyundai getz? This setting might seem a bit complicated, but by following the guidance you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a hyundai getz
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his hyundai getz
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your hyundai getz (they are generally marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your hyundai getz is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your hyundai getz, please go through our content page on this subject.
If you have any further questions about the hyundai getz, do not hesitate to consult our hyundai getz category.
