Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to blame – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Hyundai Elantra? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Hyundai Elantra.
Why adjust the headlights of your Hyundai Elantra?
So let’s begin our article with the benefit of adjusting the headlights of your Hyundai Elantra. For most people, our headlights are adjusted sufficiently, and they appear to light up enough at night. Sadly this is not always the case and looking at this setting, either because the headlights on your Hyundai Elantra are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Hyundai Elantra for safety
First of all, the headlight adjustment of a Hyundai Elantra must be done for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Hyundai Elantra . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Hyundai Elantra for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Hyundai Elantra?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Hyundai Elantra? This setting may appear a bit complicated, but by following the guidance you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Hyundai Elantra
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Hyundai Elantra
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Hyundai Elantra (they are usually marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Hyundai Elantra is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Hyundai Elantra, please browse our article on this subject.
In the event that you have any further questions about the Hyundai Elantra, do not hesitate to consult our Hyundai Elantra category.
