Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car guilty – your headlights, also often known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Honda Ridgeline? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Ridgeline.

adjust-headlights-honda-ridgeline

Why adjust the headlights of your Honda Ridgeline?

So let’s start our content with the benefit of adjusting the headlights of your Honda Ridgeline. For many of us, our headlights are adjusted well enough, and they appear to light up enough through the night. Regrettably this is not constantly the circumstance and looking at this setting, either because the headlights on your Honda Ridgeline are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Honda Ridgeline for safety

To begin with, the headlight adjustment of a Honda Ridgeline must be done for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Honda Ridgeline . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Honda Ridgeline for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Honda Ridgeline?

We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Honda Ridgeline? This adjustment may seem a bit complicated, but by following the recommendations you should be able to complete it without too much trouble.

Preparations to adjust the headlights of a Honda Ridgeline

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Honda Ridgeline

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Honda Ridgeline (they are usually designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Honda Ridgeline is logical, do not hesitate to check it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Honda Ridgeline, please go through our content on this subject matter.

If you wish more guides on the Honda Ridgeline, go to our Honda Ridgeline category.