If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car to take responsibility – your headlights, also named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your honda jazz? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your honda jazz.
Why adjust the headlights of your honda jazz?
So let’s start our content with the interest of adjusting the headlights of your honda jazz. For most people, our headlights are adjusted well enough, and they seem to light up enough through the night. Sadly this is not constantly the case and examining this setting, either because the headlights on your honda jazz are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your honda jazz for safety
To begin with, the headlight adjustment of a honda jazz must be finished for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your honda jazz . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a honda jazz for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a honda jazz?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his honda jazz? This setting may seem a bit complex, but by following the guidance you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a honda jazz
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his honda jazz
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your honda jazz (they are usually marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your honda jazz is coherent, do not think twice to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your honda jazz, please go through our content on this subject.
If you need more guides on the honda jazz, go to our honda jazz category.
