Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Honda HR V? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda HR V.

adjust-headlights-honda-hr-v

Why adjust the headlights of your Honda HR V?

So let’s begin our content with the interest of adjusting the headlights of your Honda HR V. For many people, our headlights are adjusted sufficiently, and they seem to light up enough at nighttime. However this is not always the circumstance and examining this setting, either because the headlights on your Honda HR V are not bright enough, or because you have the sensation that they are too weak is a good idea .

Adjusting the high beams of your Honda HR V for safety

First of all, the headlight adjustment of a Honda HR V must be made for a simple security motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Honda HR V . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Honda HR V for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Honda HR V?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Honda HR V? This setting may seem a bit complicated, but by following the recommendations you should have the ability to perform it without too much concern.

Preparations to adjust the headlights of a Honda HR V

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Honda HR V

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Honda HR V (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Honda HR V is logical, do not think twice to check it after you have driven it, often it may move.

.
If you want to adjust the fog lights on your Honda HR V, please browse our content on this subject matter.

If you need more tutorials on the Honda HR V, go to our Honda HR V category.