Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle to blame – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Honda CR V? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda CR V.
Why adjust the headlights of your Honda CR V?
So let’s begin our content with the benefit of adjusting the headlights of your Honda CR V. For many people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Honda CR V are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Honda CR V for safety
First of all, the headlight adjustment of a Honda CR V must be made for a very easy safety motive. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Honda CR V . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Honda CR V for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Honda CR V?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Honda CR V? This setting may appear a bit complex, but by simply following the recommendations you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Honda CR V
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Honda CR V
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Honda CR V (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Honda CR V is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Honda CR V, please go through our content on this subject.
If you need more guides on the Honda CR V, go to our Honda CR V category.
