If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car responsible – your headlights, as well called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Honda Civic? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Civic.

adjust-headlights-honda-civic

Why adjust the headlights of your Honda Civic?

So let’s start our content page with the interest of adjusting the headlights of your Honda Civic. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. Regrettably this is not constantly the circumstance and looking at this setting, either because the headlights on your Honda Civic are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Honda Civic for safety

First of all, the headlight adjustment of a Honda Civic must be carried out for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Honda Civic . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Honda Civic for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Honda Civic?

We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Honda Civic? This setting might seem a bit complex, but by following the instructions you should be able to complete it without too much concern.

Preparations to adjust the headlights of a Honda Civic

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Honda Civic

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Honda Civic (they are in most cases marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Honda Civic is coherent, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Honda Civic, please go through our content page on this subject matter.

If you have any additional questions about the Honda Civic, do not hesitate to consult our Honda Civic category.