If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle responsible – your headlights, also named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Honda Accord? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Honda Accord.
Why adjust the headlights of your Honda Accord?
So let’s start our content with the benefit of adjusting the headlights of your Honda Accord. For many people, our headlights are adjusted good enough, and they appear to light up enough after dark. Unfortunately this is not constantly the case and looking at this setting, either because the headlights on your Honda Accord are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Honda Accord for safety
First of all, the headlight adjustment of a Honda Accord must be carried out for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Honda Accord . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Honda Accord for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Honda Accord?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Honda Accord? This adjustment may appear a bit complex, but by following the instructions you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Honda Accord
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Honda Accord
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your Honda Accord (they are usually marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Honda Accord is logical, do not hesitate to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Honda Accord, please browse our content on this subject.
If you have any further questions about the Honda Accord, do not hesitate to consult our Honda Accord category.
