Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle to blame – your headlights, as well often known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your GMC Canyon? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your GMC Canyon.
Why adjust the headlights of your GMC Canyon?
So let’s start our content with the interest of adjusting the headlights of your GMC Canyon. For most people, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Unfortunately this is not constantly the case and examining this setting, either because the headlights on your GMC Canyon are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your GMC Canyon for safety
To begin with, the headlight adjustment of a GMC Canyon must be made for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your GMC Canyon . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a GMC Canyon for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a GMC Canyon?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his GMC Canyon? This setting may seem a bit complex, but by simply following the guidelines you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a GMC Canyon
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his GMC Canyon
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical modification of the headlights of your GMC Canyon (they are in general designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your GMC Canyon is logical, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your GMC Canyon, please go through our content on this subject.
If you wish more tutorials on the GMC Canyon, go to our GMC Canyon category.
