If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to blame – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Ford Transit Connect? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Transit Connect.
Why adjust the headlights of your Ford Transit Connect?
So let’s begin our content page with the benefit of adjusting the headlights of your Ford Transit Connect. For many of us, our headlights are adjusted well enough, and they appear to light up enough at nighttime. Unfortunately this is not always the case and examining this setting, either because the headlights on your Ford Transit Connect are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Ford Transit Connect for safety
To begin with, the headlight adjustment of a Ford Transit Connect must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ford Transit Connect . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford Transit Connect for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Transit Connect?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Ford Transit Connect? This setting may seem a bit complex, but by simply following the instructions you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Ford Transit Connect
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Transit Connect
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Ford Transit Connect (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford Transit Connect is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford Transit Connect, please go through our content page on this subject matter.
If you need more tutorials on the Ford Transit Connect, go to our Ford Transit Connect category.
