Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Ford Kuga? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Kuga.
Why adjust the headlights of your Ford Kuga?
So let’s start our content with the benefit of adjusting the headlights of your Ford Kuga. For most people, our headlights are adjusted good enough, and they appear to light up enough during the night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Ford Kuga are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Ford Kuga for safety
First of all, the headlight adjustment of a Ford Kuga must be finished for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ford Kuga . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Kuga for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Kuga?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Ford Kuga? This setting may appear a bit complicated, but by simply following the guidelines you should have the ability to complete it without too much trouble.
Preparations to adjust the headlights of a Ford Kuga
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Kuga
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Ford Kuga (they are generally designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford Kuga is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford Kuga, please read our content on this subject matter.
To find more tips on the Ford Kuga, take a look at the Ford Kuga category.
