Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car guilty – your headlights, as well known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Ford Focus? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Focus.
Why adjust the headlights of your Ford Focus?
So let’s begin our content with the benefit of adjusting the headlights of your Ford Focus. For many of us, our headlights are adjusted well enough, and they appear to light up enough after dark. Sadly this is not constantly the circumstance and examining this setting, either because the headlights on your Ford Focus are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Ford Focus for safety
First of all, the headlight adjustment of a Ford Focus must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Ford Focus . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford Focus for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Focus?
We will now go forward to the section that concerns you the most in this article, how to adjust the headlights of his Ford Focus? This adjustment may seem a bit difficult, but by following the recommendations you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Ford Focus
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Focus
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Ford Focus (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Ford Focus is logical, do not think twice to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Ford Focus, please browse our content on this subject matter.
If perhaps you have any additional questions about the Ford Focus, do not hesitate to consult our Ford Focus category.
