If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, also identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Ford Fiesta 4? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Fiesta 4.
Why adjust the headlights of your Ford Fiesta 4?
So let’s start our article with the benefit of adjusting the headlights of your Ford Fiesta 4. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. Regrettably this is not always the circumstance and checking this setting, either because the headlights on your Ford Fiesta 4 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Ford Fiesta 4 for safety
First of all, the headlight adjustment of a Ford Fiesta 4 must be carried out for a very easy security explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Ford Fiesta 4 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Fiesta 4 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Fiesta 4?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Ford Fiesta 4? This adjustment may appear a bit complex, but by following the guidelines you should be able to perform it without too much issue.
Preparations to adjust the headlights of a Ford Fiesta 4
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Fiesta 4
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Ford Fiesta 4 (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford Fiesta 4 is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford Fiesta 4, please browse our article on this subject matter.
If you wish more guides on the Ford Fiesta 4, go to our Ford Fiesta 4 category.
