If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, also known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Ford F 350 ? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford F 350 .
Why adjust the headlights of your Ford F 350 ?
So let’s begin our content page with the interest of adjusting the headlights of your Ford F 350 . For most people, our headlights are adjusted good enough, and they seem to light up enough at night. Sadly this is not constantly the case and checking this setting, either because the headlights on your Ford F 350 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Ford F 350 for safety
To begin with, the headlight adjustment of a Ford F 350 must be carried out for a basic safety explanation. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Ford F 350 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford F 350 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford F 350 ?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Ford F 350 ? This adjustment might seem a bit complex, but by simply following the guidelines you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Ford F 350
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford F 350
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Ford F 350 (they are in most cases designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford F 350 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford F 350 , please go through our content page on this subject.
If perhaps you have any further questions about the Ford F 350 , do not hesitate to consult our Ford F 350 category.
