Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to blame – your headlights, as well named high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Ford Explorer? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Explorer.
Why adjust the headlights of your Ford Explorer?
So let’s begin our content page with the interest of adjusting the headlights of your Ford Explorer. For most of us, our headlights are adjusted good enough, and they appear to light up enough after dark. However this is not constantly the case and checking this setting, either because the headlights on your Ford Explorer are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Ford Explorer for safety
To begin with, the headlight adjustment of a Ford Explorer must be finished for a very easy safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. However, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Ford Explorer . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Explorer for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Explorer?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Ford Explorer? This adjustment may appear a bit complex, but by following the guidelines you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Ford Explorer
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Explorer
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Ford Explorer (they are in most cases marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford Explorer is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford Explorer, please browse our content page on this subject matter.
In the event that you have any further questions about the Ford Explorer, do not hesitate to consult our Ford Explorer category.
