Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car responsible – your headlights, as well identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Ford Ecosport? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Ecosport.
Why adjust the headlights of your Ford Ecosport?
So let’s start our content page with the benefit of adjusting the headlights of your Ford Ecosport. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough during the night. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your Ford Ecosport are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Ford Ecosport for safety
To begin with, the headlight adjustment of a Ford Ecosport must be achieved for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss out an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Ford Ecosport . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Ecosport for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Ecosport?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Ford Ecosport? This adjustment may seem a bit complicated, but by simply following the guidelines you should have the ability to accomplish it without too much concern.
Preparations to adjust the headlights of a Ford Ecosport
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Ecosport
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Ford Ecosport (they are usually designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Ford Ecosport is coherent, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Ford Ecosport, please browse our content page on this subject matter.
If you want more tutorials on the Ford Ecosport, go to our Ford Ecosport category.
