Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Ford Crown Victoria? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Crown Victoria.
Why adjust the headlights of your Ford Crown Victoria?
So let’s begin our content page with the interest of adjusting the headlights of your Ford Crown Victoria. For many of us, our headlights are adjusted well enough, and they seem to light up enough during the night. Sadly this is not always the case and examining this setting, either because the headlights on your Ford Crown Victoria are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Ford Crown Victoria for safety
First of all, the headlight adjustment of a Ford Crown Victoria must be carried out for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to predict a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Ford Crown Victoria . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford Crown Victoria for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Crown Victoria?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Ford Crown Victoria? This setting may seem a bit difficult, but by simply following the instructions you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Ford Crown Victoria
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Crown Victoria
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Ford Crown Victoria (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford Crown Victoria is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Ford Crown Victoria, please read our content page on this subject.
In the event that you have any additional questions about the Ford Crown Victoria, do not hesitate to consult our Ford Crown Victoria category.
