If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your car responsible – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Ford C Max? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford C Max.
Why adjust the headlights of your Ford C Max?
So let’s begin our article with the benefit of adjusting the headlights of your Ford C Max. For many of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Regrettably this is not always the circumstance and examining this setting, either because the headlights on your Ford C Max are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Ford C Max for safety
To begin with, the headlight adjustment of a Ford C Max must be done for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Ford C Max . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Ford C Max for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford C Max?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Ford C Max? This setting might seem a bit complex, but by following the guidelines you should have the ability to do it without too much trouble.
Preparations to adjust the headlights of a Ford C Max
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford C Max
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Ford C Max (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Ford C Max is coherent, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Ford C Max, please go through our article on this subject.
If you want more guides on the Ford C Max, go to our Ford C Max category.
